INFORMATION AND INSTRUCTIONS
©2005 the vintage workshop®, LLC
Do not use this product in color laser printers. The Vintage Workshop™ Fabrics are designed for use in all inkjet printers (Thermal inkjet or Piezo inkjet).This product, if defective in materials and workmanship, will be replaced. Send the product warranty along with proof of purchase to
The Vintage Workshop
P.O. Box 30237
KC, MO 64112.
Replacement is the sole obligation under this warranty.
This warranty expressly excludes incidental and consequential damage, including, but not limited to the printer and or the print heads. Under no circumstances does The Vintage Workshop® assume any responsibility for the inkjet color printer, Thermal or Piezo print heads in the printer or the inks.
INKJET VELLUM: VW955
There is a right and wrong side to the vellum. The clipped corner should be in the upper right hand corner as you look at the vellum. This is the correct side to print. Use transparency setting when printing for best results. Allow ink to dry completely before touching to prevent smearing.VELLUM SHEET WITH ADHESIVE BACKING: VW963
Be sure to print to Vellum side, not on the sticker backing. Look for vertical cuts on backing paper and print to other side. Allow about 5 minutes of drying time.
MATTE PAPER WITH ADHESIVE BACKING: VW962
Look for diagonal cuts on backing paper and print to white matte side.
Handle film on the edges to avoid fingerprints. For best results, set print properties to transparency film. Be sure to print on the rough texture coated side. Feed one sheet at a time. Please allow 5 to 10 minutes of drying time before stacking.
Be sure to sign up for our free e-newsletter today for special offers, free ideas and projects, timeless images and creative inspiration